Configurar Router Jazztel Ar5387un Para Telefonica
Download >>> https://geags.com/2tMzDV
How to Configure a Jazztel Router Ar5387un for Telefonica: A Step-by-Step Guide
If you have a Jazztel router Ar5387un and you want to use it with Telefonica service, you may need to configure some settings to make it work properly. In this article, we will show you how to do it in a few simple steps.
What is a Jazztel router Ar5387un?
A Jazztel router Ar5387un is a device that allows you to connect to the internet through ADSL or fiber optic technology. It has four Ethernet ports for wired devices, a USB port for sharing files or printers, and a WPS button for easy WiFi connection. It also supports dual-band WiFi (2.4 GHz and 5 GHz) for faster and more stable wireless performance.
Why do you need to configure it for Telefonica?
If you have a Jazztel router Ar5387un and you want to use it with Telefonica service, you may need to change some settings to make it compatible. This is because Jazztel and Telefonica use different protocols and parameters to provide internet access. For example, Jazztel uses PPPoE (Point-to-Point Protocol over Ethernet) while Telefonica uses IPoE (IP over Ethernet). If you don't configure your router accordingly, you may experience problems such as slow speed, connection drops, or no internet at all.
How to configure it for Telefonica?
To configure your Jazztel router Ar5387un for Telefonica, you need to access its web interface and modify some settings. Here are the steps to follow:
Connect your computer to the router using an Ethernet cable or WiFi. If you use WiFi, you can find the network name (SSID) and password on the label at the bottom of the router.
Open a web browser and type http://192.168.1.1 in the address bar. Press Enter.
Enter the username and password to log in. The default ones are admin and admin.
Go to Advanced Setup > WAN Service.
Delete any existing WAN service by clicking on the trash icon next to it.
Click on Add to create a new WAN service.
Select IP over Ethernet (IPoE) as the connection type and click Next.
Select Obtain an IP address automatically (DHCP) and click Next.
Select Enable NAT and Enable Firewall and click Next.
Select Enable IGMP Multicast Proxy and click Next.
Select Enable WAN Service and enter a name for it (e.g., Telefonica). Click Next.
Click Apply/Save to save the changes.
Restart your router by unplugging it from the power source and plugging it back in.
Congratulations! You have successfully configured your Jazztel router Ar5387un for Telefonica. You should now be able to enjoy your internet service without any issues.
What are the benefits of configuring a Jazztel router Ar5387un for Telefonica?
By configuring your Jazztel router Ar5387un for Telefonica, you can enjoy some benefits such as:
Better compatibility: You can avoid potential conflicts or errors that may arise from using different protocols or parameters.
Better performance: You can optimize your internet speed and stability by using the appropriate settings for your service provider.
Better security: You can protect your network from unauthorized access or attacks by enabling the firewall and NAT features.
Better flexibility: You can use your Jazztel router Ar5387un with any Telefonica service plan, whether it is ADSL or fiber optic.
What are the drawbacks of configuring a Jazztel router Ar5387un for Telefonica?
While configuring your Jazztel router Ar5387un for Telefonica has many advantages, it also has some drawbacks that you should be aware of:
Loss of warranty: If you modify the settings of your Jazztel router Ar5387un, you may void its warranty and lose the technical support from Jazztel.
Loss of features: If you configure your Jazztel router Ar5387un for Telefonica, you may lose some features that are exclusive to Jazztel service, such as VoIP (Voice over IP) or IPTV (Internet Protocol Television).
Loss of updates: If you configure your Jazztel router Ar5387un for Telefonica, you may not receive the latest firmware updates from Jazztel that may improve its functionality or security.
Therefore, before configuring your Jazztel router Ar5387un for Telefonica, you should weigh the pros and cons and decide if it is worth it for you.
How to troubleshoot your Jazztel router Ar5387un for Telefonica?
If you have configured your Jazztel router Ar5387un for Telefonica and you still encounter some problems, you can try some troubleshooting steps to fix them. Here are some common issues and solutions:
No internet connection: Check if the WAN light on your router is green and steady. If not, make sure the cable from the wall socket to the router is properly connected and not damaged. You can also try to restart your router by unplugging it from the power source and plugging it back in.
Slow internet speed: Check if there are any other devices or applications that are using a lot of bandwidth on your network. You can also try to change the WiFi channel on your router to avoid interference from other wireless networks. To do this, go to Advanced Setup > Wireless > Basic and select a different channel from the drop-down menu.
WiFi connection drops: Check if your device is too far from the router or there are any obstacles or walls that may weaken the signal. You can also try to update the firmware of your router by going to Management > Update Software and following the instructions.
If none of these steps work, you can contact Jazztel or Telefonica customer service for further assistance.
How to reset your Jazztel router Ar5387un for Telefonica?
If you want to reset your Jazztel router Ar5387un for Telefonica to its factory settings, you can do it in two ways:
Using the web interface: Go to Management > Settings > Restore Default and click on Restore Default Settings. This will erase all your custom settings and restore the default ones.
Using the reset button: Locate the reset button at the back of the router and press it with a pin or a paperclip for about 10 seconds. This will also erase all your custom settings and restore the default ones.
Note that resetting your router will delete all your configuration for Telefonica and you will need to set it up again following the steps above.
How to change the language of your Jazztel router Ar5387un for Telefonica?
If you want to change the language of your Jazztel router Ar5387un for Telefonica, you can do it easily from the web interface. Here are the steps to follow:
Access the configuration panel of the router. To do this, open a web browser and type http://192.168.1.1. The username and password by default are admin and admin, respectively.
Go to Management > Access Control > Passwords.
Select the language you prefer from the drop-down menu at the top right corner of the screen.
Click Apply/Save to save the changes.
Now you can enjoy your Jazztel router Ar5387un for Telefonica in your preferred language.
How to update the firmware of your Jazztel router Ar5387un for Telefonica?
If you want to update the firmware of your Jazztel router Ar5387un for Telefonica, you can do it manually or automatically. Here are the methods to do it:
Manually: You can download the latest firmware version from the Jazztel website and upload it to your router. To do this, go to Management > Update Software and click on Browse to select the firmware file. Then click on Update Software to start the process. Wait until it finishes and do not turn off or disconnect your router.
Automatically: You can enable the automatic update feature on your router and let it check and install the latest firmware version by itself. To do this, go to Management > Update Software and check the box that says Enable Automatic Update. Then click on Apply/Save to save the changes.
Updating the firmware of your Jazztel router Ar5387un for Telefonica can improve its functionality or security and fix some bugs or errors.
How to change the password of your Jazztel router Ar5387un for Telefonica?
If you want to change the password of your Jazztel router Ar5387un for Telefonica, you can do it easily from the web interface. Here are the steps to follow:
Access the configuration panel of the router. To do this, open a web browser and type http://192.168.1.1. The username and password by default are admin and admin, respectively.
Go to Management > Access Control > Passwords.
Enter the current password and the new password that you want to use. You can also change the username if you want.
Click Apply/Save to save the changes.
Now you have changed the password of your Jazztel router Ar5387un for Telefonica. You should use the new password to access the web interface in the future.
How to enable or disable the WiFi of your Jazztel router Ar5387un for Telefonica?
If you want to enable or disable the WiFi of your Jazztel router Ar5387un for Telefonica, you can do it easily from the web interface. Here are the steps to follow:
Access the configuration panel of the router. To do this, open a web browser and type http://192.168.1.1. The username and password by default are admin and admin, respectively.
Go to Advanced Setup > Wireless > Basic.
Check or uncheck the box that says Enable Wireless.
Click Apply/Save to save the changes.
Now you have enabled or disabled the WiFi of your Jazztel router Ar5387un for Telefonica. You can turn it on or off depending on your needs or preferences.
Conclusion
In this article, we have shown you how to configure your Jazztel router Ar5387un for Telefonica. We have explained the steps to change the connection type, the WiFi settings, the language, the firmware, the password, and the wireless modes. We have also discussed the benefits and drawbacks of configuring your Jazztel router Ar5387un for Telefonica, and how to troubleshoot some common problems. By following this guide, you should be able to use your Jazztel router Ar5387un with Telefonica service without any issues.
We hope you have found this article helpful and informative. If you have any questions or comments, please feel free to leave them below. Thank you for reading! 4aad9cdaf3